The health and safety advisor shall prepare a list of all items of work requiring a strategy statement. This list is to be kept on site and up-dated as the project moves forward. A copy of the list, and of the individual method statements are going to be made available to the CDM Co-ordinator.
Generally, method statements shall be prepared for activities not covered in the Principal Contractor's procedures manual, where dangers are not dealt with under universal assessments and standard procedures, or where the Principal Contractor may not be in overall control over the work activities ( e.g. Expert sub-contractor operations ).
Method statements should be specific and proportionate to the component of work on the project, and contain info on the safety procedures needed or the task to be carried out, as well as the management part connected with the task.
The following information will be required from the Principal Contractor for inclusion by the health and safety into the safety and health File.
This information is to be applied for from the relevant sources as the work proceeds and be picked up and collated under the headings below and presented in good order on completion of the works for final preparation of the File by the health and safety for handing to the customer allowing Practical Completion to be attained.
The Contents of the H&S File shall be laid out as detailed within the tender, additionally the health and safety file should ideally include
General description of the project ;
remaining dangers and how they've been dealt with.
Any hazards linked with the materials used ( as an example hazardous substances, lead paint, special coatings which should not be burned off ) ;
Health and safety info regarding equipment provided for cleaning or maintaining the structure ;
THE ABOVE information SHOULD ALSO INCLUDE the info IDENTIFIED within the EMPLOYER'S needs DOCUMENT IN THE FORMAT SPECIFIED, WITH EACH SECTION HAVING ITS OWN CONTENTS PAGE TO guarantee ease of use.
The Contents of the safety and health File shall be laid out as detailed within the tender, in addition the health and safety file should ideally include
- General outline of the project ;
- leftover hazards and how they've been dealt with.
- Any dangers associated with the materials used ( for example hazardous substances, lead paint, special coatings which shouldn't be burnt off ) ;
- Health and safety information regarding gear provided for cleaning or maintaining the structure ;
Generally, method statements shall be prepared for activities not covered in the Principal Contractor's procedures manual, where dangers are not dealt with under universal assessments and standard procedures, or where the Principal Contractor may not be in overall control over the work activities ( e.g. Expert sub-contractor operations ).
Method statements should be specific and proportionate to the component of work on the project, and contain info on the safety procedures needed or the task to be carried out, as well as the management part connected with the task.
The following information will be required from the Principal Contractor for inclusion by the health and safety into the safety and health File.
This information is to be applied for from the relevant sources as the work proceeds and be picked up and collated under the headings below and presented in good order on completion of the works for final preparation of the File by the health and safety for handing to the customer allowing Practical Completion to be attained.
The Contents of the H&S File shall be laid out as detailed within the tender, additionally the health and safety file should ideally include
General description of the project ;
remaining dangers and how they've been dealt with.
Any hazards linked with the materials used ( as an example hazardous substances, lead paint, special coatings which should not be burned off ) ;
Health and safety info regarding equipment provided for cleaning or maintaining the structure ;
THE ABOVE information SHOULD ALSO INCLUDE the info IDENTIFIED within the EMPLOYER'S needs DOCUMENT IN THE FORMAT SPECIFIED, WITH EACH SECTION HAVING ITS OWN CONTENTS PAGE TO guarantee ease of use.
The Contents of the safety and health File shall be laid out as detailed within the tender, in addition the health and safety file should ideally include
- General outline of the project ;
- leftover hazards and how they've been dealt with.
- Any dangers associated with the materials used ( for example hazardous substances, lead paint, special coatings which shouldn't be burnt off ) ;
- Health and safety information regarding gear provided for cleaning or maintaining the structure ;
No comments:
Post a Comment